motorisedelectricblinds

Recently added item(s) ×

You have no items in your shopping cart.

Measuring

1)  Enter the width of your window in mm or cm. This if inside the recess it should be measured at the top middle and bottom and the smallest size used.

2)  Then enter the drop of your window in mm or cm this if inside the recess it should be measured at the left middle and right of the window and the smallest size used.

3)  The measurements in 1 & 2 above will the be called either Recess Size or Exact Blind Size so entered as that, we will then deduct 1cm from width and drop to allow for fitting.

4)  If the blind is being fitted outside of the recess we recommend adding 10cm to each side of the window opening and to top and bottom that's an extra 20cm on width and 20cm on the drop this allows the blind to overlap the window to stop being able to see into the room from the sides. This extra width and drop mentioned here is reliant on you having the space around the window so please check carefully and allow the overlap that you can. The size you enter here should be the exact size and the blind or curtain track will be made to this size exact size so please make sure it will fit..

5)  If you enter your blind or curtain size as ( Exact ) this means that we will make the blind to that exact size and will make no allowances for fitting so remember to double check that the size is correct.

 If you are not sure of how to measure please feel free to call us for advice or contact our other site www.windowshadings.co.uk for a full measure supply and installation service but there will be extra charges for this.

Please note that our products are made to measure and if they are made to the wrong size they are no good to you or us and will need to be remade at your expense, if the case is that the blind is too big it may be able to be cut down to fit but a charge will be made for this and for re-delivery. Please also note that goods must be returned to us at your cost.